Dead Right There. The DRT is MDT's lightweight magnesium chassis built for night hunting. It's light enough to carry on long stalks and rigid enough to hold zero once you set up. A built-in 20 MOA night vision bridge keeps your thermal or NV clip-on lined up with your day optic.
Currently on Backorder
Magnesium construction: The chassis and buttstock are skeletonized magnesium, with aluminum, titanium and carbon fiber used where they're needed. It weighs 3.2 lb with the stock, NV bridge and grip installed.
Built-in 20 MOA NV bridge: It runs the full length of the chassis to keep your clip-on co-witnessed with the primary optic under bipod, tripod or bag pressure.
Rigid forend: Resists flex, so point of impact doesn't shift when you load it against a support.
Folding stock: Adjustable friction folder with a secure lock. The fold-over design covers the bolt handle when collapsed.
Low bore axis: Less muzzle rise, so you keep the sight picture through recoil and see your impacts.
Multifunction ARCA rail: Works with ARCALOCK and RRS Lock.
Offset Picatinny rail: A dedicated spot for an IR laser or rangefinder.
Built-in barricade stop: Locks into support bags without loading the magazine.
Adjustable fit: Length of pull runs 12"–14.25", the cheekpiece adjusts 1.15" in height, and the M-LOK thumb shelf repositions.
Carbon fiber vertical grip (Gen 2): Textured and adjustable.
Adjustable, lockable mag latch with Delrin dowel pins so magazines stay put in the field.
ActionRemington 700 Short Action footprintColorsBlack, FDEWeight (chassis, stock, NV bridge, grip)3.2 lb (51.2 oz)Overall Dimensions33.7" × 1.99" × 7.33"Forend Length24.52" (14.93" from recoil lug)Length of Pull12" – 14.25" (305–362 mm)Cheekpiece Adjustment1.15"Barrel DiameterUp to 1.25" straight contour (spacers included)Minimum Barrel Length15" (to clear the NV bridge)Optic Requirements20 MOA base/rail; 1.5" minimum ring heightMaterialsMagnesium, aluminum, titanium, carbon fiber
Magnesium chassis with built-in folding buttstock
Carbon fiber vertical grip (Gen 2)
Aluminum ARCA rail with spacers
Aluminum NV bridge with spacers for larger barrels
Aluminum offset Picatinny rail
Adjustable M-LOK thumb rest
LOP adjustment knob
Magwell dowels (4)
Grip tape
Complete installation hardware, including titanium action screws
Fits Remington 700 SA-footprint actions and clones, including Rem 700 variants, Defiance, Kelbly, BAT, Impact Precision, Surgeon, MDT Lone Peak, PROOF, Zermatt, Bergara B-14, Christensen, Bighorn, Cadex, Faxon, Springfield Waypoint and others. Check MDT's full compatibility list for your specific action.
Dead Right There. The DRT is MDT's lightweight magnesium chassis built for night hunting. It's light enough to carry on long stalks and rigid enough to hold zero once you set up. A built-in 20 MOA night vision bridge keeps your thermal or NV clip-on lined up with your day optic.
Currently on Backorder
Magnesium construction: The chassis and buttstock are skeletonized magnesium, with aluminum, titanium and carbon fiber used where they're needed. It weighs 3.2 lb with the stock, NV bridge and grip installed.
Built-in 20 MOA NV bridge: It runs the full length of the chassis to keep your clip-on co-witnessed with the primary optic under bipod, tripod or bag pressure.
Rigid forend: Resists flex, so point of impact doesn't shift when you load it against a support.
Folding stock: Adjustable friction folder with a secure lock. The fold-over design covers the bolt handle when collapsed.
Low bore axis: Less muzzle rise, so you keep the sight picture through recoil and see your impacts.
Multifunction ARCA rail: Works with ARCALOCK and RRS Lock.
Offset Picatinny rail: A dedicated spot for an IR laser or rangefinder.
Built-in barricade stop: Locks into support bags without loading the magazine.
Adjustable fit: Length of pull runs 12"–14.25", the cheekpiece adjusts 1.15" in height, and the M-LOK thumb shelf repositions.
Carbon fiber vertical grip (Gen 2): Textured and adjustable.
Adjustable, lockable mag latch with Delrin dowel pins so magazines stay put in the field.
ActionRemington 700 Short Action footprintColorsBlack, FDEWeight (chassis, stock, NV bridge, grip)3.2 lb (51.2 oz)Overall Dimensions33.7" × 1.99" × 7.33"Forend Length24.52" (14.93" from recoil lug)Length of Pull12" – 14.25" (305–362 mm)Cheekpiece Adjustment1.15"Barrel DiameterUp to 1.25" straight contour (spacers included)Minimum Barrel Length15" (to clear the NV bridge)Optic Requirements20 MOA base/rail; 1.5" minimum ring heightMaterialsMagnesium, aluminum, titanium, carbon fiber
Magnesium chassis with built-in folding buttstock
Carbon fiber vertical grip (Gen 2)
Aluminum ARCA rail with spacers
Aluminum NV bridge with spacers for larger barrels
Aluminum offset Picatinny rail
Adjustable M-LOK thumb rest
LOP adjustment knob
Magwell dowels (4)
Grip tape
Complete installation hardware, including titanium action screws
Fits Remington 700 SA-footprint actions and clones, including Rem 700 variants, Defiance, Kelbly, BAT, Impact Precision, Surgeon, MDT Lone Peak, PROOF, Zermatt, Bergara B-14, Christensen, Bighorn, Cadex, Faxon, Springfield Waypoint and others. Check MDT's full compatibility list for your specific action.
