This is a Pre Order!
We want to thank you for the support! Due to the high demand pre-orders received after February 2, 2026, will now be expect to ship in or around Q4 2026. We appreciate your patience and continued support.
Trickler Pricing Targets:
Meehl Solutions Trickler (Standalone, without scale): $440 Perfect for users who already own a compatible scale
Meehl Solutions Trickler Bundle with Programmed FX-123i Scale: $1100 A complete, ready-to-use solution
(Please note: Pricing has increased due to the discontinuation of the FX-120 model. Its replacement, the FX-123, is priced higher by A&D.)
Beta Tested and Validated Powders:
H4350, Varget, N150, N140, N555, N565, N540, H1000, Retumbo, H4831, XBR8208, RL26,
Not currently supported Powder/Powder types:
Flake powders, Ball powders
The Meehl Solutions Trickler is a precision scale-and-trickler system built around the A&D FX-120i and FX-123 balance, recognized for its stability, sensitivity, and reliability in competitive reloading.
The design is specifically engineered for commonly used competition reloading powders on the market, such as difficult-to-meter stick (extruded) types like Varget, H4350, IMR 4831, N150, N555, and similar variants—ideal for high-volume PRS (Precision Rifle Series) reloaders who demand consistent, efficient throws. Typical charge weights achieve throws in 6–10 seconds, with average consistency within 0.02–0.04 grain tolerances depending on powder type and assuming proper setup and configuration. Under controlled conditions and with attention to setup and environment, variance often narrows to sub-0.02 grain (approximately 0.05% relative error with a 40 grain charge weight). This level of repeatability aligns with or exceeds leading automated dispensers in the market.
(Please note: Performance cannot be guaranteed with any powders not currently listed as tested above! This system is optimized for stick (extruded) powders and will not perform well with flake, ball powders or particularly small and irregular extruded powders.)
Developed as a personal project by an active precision shooter and competitor, the system reflects real-world reloading experience: loading for PRS, F-Class, NRL Hunter, or other disciplines where charge uniformity directly impacts group size and score. The goal was and is simple—eliminate variability in powder throws while keeping costs reasonable for those who invest heavily in quality brass, bullets, and primers.
The Meehl Solutions Trickler prioritizes value without reducing build quality or capability. It uses proven components and straightforward engineering to provide dependable results for serious reloaders.
Also we are proud to be working with Dead Drop Powder Cups to include a highly optimized powder cup with included with every trickler. This custom-designed cup minimizes bounce and spill, ensuring cleaner, more efficient powder handling during the reloading process.
Furthermore we are excited to share that we are working with Dram Worx to provide the highest quality Pyrex Hopper body’s that will improve flow stability and reduce static issues.
If manual trickling feels too slow, or current dispensers fall short on speed or consistency with stick powders, the Meehl Solutions Trickler offers a practical, high-performing alternative that respects both your standards and your budget.
Preorder Information
By placing a preorder reservation today, you'll secure your spot in line for this innovative precision reloading tool.
Shipping Priority: We will fulfill and ship orders in the sequence they were received, ensuring early reservations get priority access.
Payment Process: No payment is required at the time of reservation. Once the product is ready for release, you'll receive a secure email link to complete your purchase and finalize shipping details.
This is a Pre Order!
We want to thank you for the support! Due to the high demand pre-orders received after February 2, 2026, will now be expect to ship in or around Q4 2026. We appreciate your patience and continued support.
Trickler Pricing Targets:
Meehl Solutions Trickler (Standalone, without scale): $440 Perfect for users who already own a compatible scale
Meehl Solutions Trickler Bundle with Programmed FX-123i Scale: $1100 A complete, ready-to-use solution
(Please note: Pricing has increased due to the discontinuation of the FX-120 model. Its replacement, the FX-123, is priced higher by A&D.)
Beta Tested and Validated Powders:
H4350, Varget, N150, N140, N555, N565, N540, H1000, Retumbo, H4831, XBR8208, RL26,
Not currently supported Powder/Powder types:
Flake powders, Ball powders
The Meehl Solutions Trickler is a precision scale-and-trickler system built around the A&D FX-120i and FX-123 balance, recognized for its stability, sensitivity, and reliability in competitive reloading.
The design is specifically engineered for commonly used competition reloading powders on the market, such as difficult-to-meter stick (extruded) types like Varget, H4350, IMR 4831, N150, N555, and similar variants—ideal for high-volume PRS (Precision Rifle Series) reloaders who demand consistent, efficient throws. Typical charge weights achieve throws in 6–10 seconds, with average consistency within 0.02–0.04 grain tolerances depending on powder type and assuming proper setup and configuration. Under controlled conditions and with attention to setup and environment, variance often narrows to sub-0.02 grain (approximately 0.05% relative error with a 40 grain charge weight). This level of repeatability aligns with or exceeds leading automated dispensers in the market.
(Please note: Performance cannot be guaranteed with any powders not currently listed as tested above! This system is optimized for stick (extruded) powders and will not perform well with flake, ball powders or particularly small and irregular extruded powders.)
Developed as a personal project by an active precision shooter and competitor, the system reflects real-world reloading experience: loading for PRS, F-Class, NRL Hunter, or other disciplines where charge uniformity directly impacts group size and score. The goal was and is simple—eliminate variability in powder throws while keeping costs reasonable for those who invest heavily in quality brass, bullets, and primers.
The Meehl Solutions Trickler prioritizes value without reducing build quality or capability. It uses proven components and straightforward engineering to provide dependable results for serious reloaders.
Also we are proud to be working with Dead Drop Powder Cups to include a highly optimized powder cup with included with every trickler. This custom-designed cup minimizes bounce and spill, ensuring cleaner, more efficient powder handling during the reloading process.
Furthermore we are excited to share that we are working with Dram Worx to provide the highest quality Pyrex Hopper body’s that will improve flow stability and reduce static issues.
If manual trickling feels too slow, or current dispensers fall short on speed or consistency with stick powders, the Meehl Solutions Trickler offers a practical, high-performing alternative that respects both your standards and your budget.
Preorder Information
By placing a preorder reservation today, you'll secure your spot in line for this innovative precision reloading tool.
Shipping Priority: We will fulfill and ship orders in the sequence they were received, ensuring early reservations get priority access.
Payment Process: No payment is required at the time of reservation. Once the product is ready for release, you'll receive a secure email link to complete your purchase and finalize shipping details.
Image 1 of 4
Image 2 of 4
Image 3 of 4
Image 4 of 4