A carbon fiber wrapped barrel blank built around a match-grade 416R stainless core, hand lapped after rifling. Helix 6's high-carbon, low-resin wrap gives a stiff, light barrel that sheds heat well and holds point of impact through long strings. Made in Vancouver, Washington, and backed by Helix 6's sub-1/2 MOA accuracy guarantee with match-grade ammunition.
Build your blank:
Rifling - Button rifled or cut rifled.
Caliber and Twist - .224 through .375. Twist is set per caliber; .308 offers 1:8 or 1:10 (plus 1:9 cut rifled).
Contour / Shank - Hunter contour with a 1.200 in shank for most actions; 1.250 in shank on .338; 1.350 in shank on the .375 1:9.5 (32 in max finish); Tikka Hunter contour with a 1.140 in shank for Tikka T3/T3x.
Specs: Approximately 3 lb 5 oz to 3 lb 10 oz as an unfinished 27 in blank (.338 measured at 29 in); each inch shorter saves about 1.5 oz. The steel core supports 5/8-24 muzzle threads at any finished length, so the blank can be finished at full length or cut shorter.
Each blank is built to order by Helix 6 Precision. Button-rifled blanks typically take about 6 weeks (common 6.5mm and 30 cal sometimes sooner; less common and large-bore calibers up to 90 days), and cut-rifled blanks up to about 90 days. After you order, we confirm your spec and send the current lead time. Orders can't be cancelled or returned once released to production.
Supplied as: an unchambered, unthreaded blank. It must be chambered, threaded, crowned and fitted by a qualified gunsmith experienced with carbon fiber barrels.
Barrel blanks are not firearms and ship directly to you. Export-controlled item; US addresses only.
A carbon fiber wrapped barrel blank built around a match-grade 416R stainless core, hand lapped after rifling. Helix 6's high-carbon, low-resin wrap gives a stiff, light barrel that sheds heat well and holds point of impact through long strings. Made in Vancouver, Washington, and backed by Helix 6's sub-1/2 MOA accuracy guarantee with match-grade ammunition.
Build your blank:
Rifling - Button rifled or cut rifled.
Caliber and Twist - .224 through .375. Twist is set per caliber; .308 offers 1:8 or 1:10 (plus 1:9 cut rifled).
Contour / Shank - Hunter contour with a 1.200 in shank for most actions; 1.250 in shank on .338; 1.350 in shank on the .375 1:9.5 (32 in max finish); Tikka Hunter contour with a 1.140 in shank for Tikka T3/T3x.
Specs: Approximately 3 lb 5 oz to 3 lb 10 oz as an unfinished 27 in blank (.338 measured at 29 in); each inch shorter saves about 1.5 oz. The steel core supports 5/8-24 muzzle threads at any finished length, so the blank can be finished at full length or cut shorter.
Each blank is built to order by Helix 6 Precision. Button-rifled blanks typically take about 6 weeks (common 6.5mm and 30 cal sometimes sooner; less common and large-bore calibers up to 90 days), and cut-rifled blanks up to about 90 days. After you order, we confirm your spec and send the current lead time. Orders can't be cancelled or returned once released to production.
Supplied as: an unchambered, unthreaded blank. It must be chambered, threaded, crowned and fitted by a qualified gunsmith experienced with carbon fiber barrels.
Barrel blanks are not firearms and ship directly to you. Export-controlled item; US addresses only.
